CZ electromagnetic vibrator warehouse wall (also known as rapper) is by high-frequency vibration and impact, effectively eliminating clogging material due to internal friction, deliquescence, charged, composition segregation and other causes, the tower arch phenomenon, so that the material from the material hatch successfully discharged. To ensure a stable supply of the necessary equipment. CZ-type warehouse wall vibrator has been widely used in mining, metallurgy, chemical industry, building materials, machinery and other industries. Project / Model CZ10 CZ50 CZ100 CZ250 CZ400 CZ600 CZ800 CZ1000 vibration force (kg) 10 50 100 250 600 600 1000 effective power (KW) 0.008 0.03 0.1 0.06 0.15 0.15 0.2 operating voltage (V) 220 220 220 220 220 220 220 Power frequency ( HZ) 50 50 50 50 50 50 50 Operating Supply (A) 0.11 1.0 1.6 1.0 2.3 2.3 3.8 frequency (beats / min) 3000 3000 3000 3,000,300,030,003,000 Zhen vibrator amplitude (mm) 1.5 1.5 1.5 2 2 2 2 Control way half-wave rectification half-wave rectification half-wave rectification half-wave rectification half-wave rectification half-wave rectification half-wave rectifier Total Weight (kg) 2 12.5 24 24 58 58 119.3 adapted to be mounted silo wall thickness (mm) 0.6-0.8 1.2- 1.6 2.5-3.2 1.0-4.0 3.0-8.0 control principle 3.0-8.0 6.0-14 vibrator for half-wave rectifier. Electromagnetic coil powered by alternating current through the diode rectifier. When the line is connected, the positive half-cycle of the pulsating DC voltage is applied to the solenoid coil, by the action of an electromagnet, between the vibrating body and a base to produce pulsed electromagnetic force, the vibration body is attracted, and the elastic potential energy storage system, the negative half cycle the diode does not conduct, the electromagnetic force disappears, the potential energy stored by the elastic system, the vibration of the vibration body in the opposite direction. This cycle, the vibration frequency reciprocating body will be to alternating current. A high-frequency periodic vibration of the vibrating body, the "impact block" to the silo wall. Periodic vibration warehouse wall, on the one hand the material out of contact with the silo wall, on the other hand the material by alternating the speed and acceleration of the impact, in an unstable state, thus effectively overcome internal friction and focus forces the material. So that the material is discharged from the hopper outlet smoothly. CZ-type electromagnetic vibrator warehouse wall use and installation: 1. Note the use vibrators items (1) of the vibrator in the work process, the core and the armature is not allowed collision, such as a collision, you must adjust the amplitude of the vibrating body and immediately working air gap. (2) you must first open the front gate bin vibrators, otherwise the material inside the silo to be tapped. (3) After a long pause vibrator but reuse should first check the coil is damp, if damp, it must be dried before use. (4) CZ warehouse wall vibrator does not apply to explosion-proof requirements of the occasion. 2, vibrator mounted in order to better play the role of the vibrator, the installation should pay attention to the following points: ⑴ vibrators should generally be installed in the lower 1/4 of the silo along the high warehouse location. ⑵ as a reinforcing structure when the silo, the vibrator should not be installed on the reinforcing structure. CZ-type electromagnetic vibrator warehouse wall Specifications: Model CZ10 CZ50 CZ100 CZ250 (CZ200) CZ600 (CZ400) CZ1000 (CZ800) vibration force (kg) 10 50 100 250 600 1000 power (kw) 0.008 0.030 0.06 1.0 0.15 0.2 Operating Voltage (v) 220 220 220 220 220 220 Operating Current (A) 0.11 1.0 1.0 1.6 2.3 3.8 vibration frequency (times / min) 3000 3000 3,000,300,030,003,000 vibrator amplitude (mm) 1.5 1.5 1.5 2 2 2 adapted compartment wall thickness (mm) 0.6-0.8 1.2-1.6 2.5-3.2 1.0-4.0 3.0-8.0 6.0-14 Dimensions 166 * 62 280 * 110 300 * 135 302 * 90 * 242 410 * 240 * 363 520 * 295 * 380 Weight (kg ) 2 12.5 242 458 119.3